Next Working Day Available - Order Before 2pm

100,000+ Successful Projects to Date

Hose-down poultry enclosure made of plastic building blocks

Djurhägn, boxar och karantänutrymmen

Inhägnader som spolas rena och aldrig ruttnar

Djurhållning är våt, smutsig och utsatt för gnagning. PolyBrick®-väggar spolas rena, kan inte ruttna eller hålla kvar fukt, och monteras ned när du behöver flytta eller bygga om en inhägnad.

Varför PolyBrick fungerar här

Utrymmen för djur utsätts för påfrestningar som trädgårdsstrukturer aldrig behöver klara. De blir blöta dagligen, nedsmutsade, lutade mot, repade, gnuggade och gnagda, och de behöver rengöras regelbundet.

Trä absorberar allt detta. Det suger upp urin och spolvatten, förblir fuktigt i de skuggiga nedre skikten där det gör mest skada, och när det väl börjar mjukna blir det både ett konstruktionsproblem och en grogrund för bakterier och andra biologiska risker. Impregnerat trä för dessutom med sig träskyddsmedel inom räckhåll för djur som gnager.

PolyBrick är icke-absorberande. Det tar inte upp fukt, mjuknar inte, ruttnar inte och håller inte kvar fukt i de nedre skikten. Det spolas rent med vatten i stället för att förbli permanent smutsigt. Materialet är inert – det finns ingenting på ytan som kan gnidas eller gnagnas bort.

Eftersom inga fästelement används kan en inhägnad också byggas om. Löpgångar förlängs, boxar delas upp, karantänutrymmen byggs och rivs ned igen, och blocken används vidare i nästa projekt i stället för att kasseras.

Lämpliga användningsområden

  • Höns- och anklöpgångar
  • Kanin- och marsvinshägn
  • Hundgårdar och kennelomgärdningar
  • Grisväggar och grisstigar
  • Get- och fårboxar
  • Väggar till foder- och hölager
  • Isolerings- och karantänboxar
  • Anläggningar för räddning och omplacering av djur

Snabbfakta

Montering Tryckinlåsning. Inga verktyg, bruk eller fästelement
Rengöring Icke-absorberande yta. Spolas och tvättas ren; suger inte upp smuts
Ombyggbarhet Boxar kan förlängas, delas upp eller monteras ned och återuppbyggas på annan plats
Kontaktyta Inert. Inget ytbehandlingsmedel som kan gnidas eller slickas bort
Väderbeständighet UV-stabiliserad. Ruttnar inte, rostar inte, vrider sig inte och blir inte spröd
Material 100% återvunnen polypropylen, tillverkad inom EU av återvunna polymerer
Tryckhållfasthet Testad till 150 tonnes/m² under fast statisk last
Livslängd 25 år med garanti

Vad väggarna klarar och inte klarar

Det är värt att vara tydlig, eftersom djurhållning inte är ett område för vaghet.

PolyBrick-väggar utgör den solida delen av en inhägnad: de nedre skikten, låga väggar, avdelare och omgärdningar. De ger dig en ren, tvättbar och rötbeständig konstruktion på den nivå där trä sviker först.

De är inte ett komplett inneslutningssystem på egen hand. Allt som klättrar, hoppar, flyger eller gräver kräver resten av specifikationen: nät ovanför väggen, tak eller nätövertäckning, samt ett grävskydd under mark för djur som gräver eller rovdjur som försöker ta sig in underifrån.

Se blockstommen som den del av inhägnaden som håller sig ren och aldrig ruttnar, medan nät, tak och nedgrävd kantavgränsning sköter inneslutningen ovan och under mark. När du håller eller skyddar en specifik art, följ riktlinjerna för den arten vad gäller höjd, maskstorlek, grävdjup och utrymme per djur.

Utformning för enkel rengöring

Den enskilt viktigaste praktiska skillnaden mellan en inhägnad som håller sig hygienisk och en som inte gör det är om den faktiskt går att rengöra ordentligt.

Bygg med fall så att vatten rinner till ett ställe och ut, i stället för att samlas i ett hörn. Håll inre hörn så öppna som möjligt, eftersom trånga hörn samlar smutsigt strö och är svårast att mocka ur ordentligt. Där en vägg möter ett hårdgjort golv, utforma skarven så att en borste kommer åt.

Bygg sektioner som kan lyftas ut där du behöver åtkomst, på samma sätt som en kompostbehållares frontplanka. Att kunna öppna en vägg i stället för att arbeta genom en liten grind gör en avsevärd skillnad för hur grundligt en box faktiskt kan rengöras.

How it goes together

  1. Set out the compound and check the ground. Level, firm and free-draining is what you want, and a wet corner will be the problem area forever if you build over it.
  2. Decide the floor before the walls. Bare earth, hard standing, or a stabilised gravel base each change how the compound cleans and drains, and it is far easier to prepare now.
  3. Prepare the ground for the first course: excavate to firm ground, compact, and screed level. Everything above follows this course.
  4. Where anything digs or where predators are a risk, put the dig-proof perimeter in at this stage. Retrofitting it later means taking the walls apart.
  5. Lay the first course and check level in both directions along the whole run.
  6. Build up in courses, staggering the joints between courses. Where you want removable access, build those sections as loose courses that lift out.
  7. Fix mesh, panels or roofing to whatever framework the design calls for, and make sure the junction between the blockwork and everything above it has no gaps at the level animals can reach.
  8. Cap the top course for a clean finish and an edge that is comfortable to handle.

Choosing the floor

The floor decides how much work the compound is, day to day.

Bare earth suits poultry and pigs that are meant to root and dust bathe, but it poaches in winter and cannot be disinfected.

Hard standing cleans and disinfects thoroughly, which is what you want for a quarantine pen or a kennel, but it needs a fall and a drain or the washing water has nowhere to go.

A stabilised gravel base sits between the two: firm and free-draining underfoot, no standing mud, and it copes with a hosing without turning to slurry. It is often the best answer for a run that is in constant use, and it stops the perimeter of the compound becoming the muddiest part of the holding.

Quarantine and isolation pens

An isolation pen has a different job from a permanent run: it needs to be thoroughly cleanable, genuinely separate, and often temporary.

Non-absorbent walls matter more here than anywhere. A surface that soaks up soiling cannot be properly disinfected, and porous, cracked or splintered materials give organisms somewhere to sit through a clean-down. Blockwork that washes to a clean surface is a considerably better starting point.

The dismantling advantage matters too. A quarantine pen can be built when it is needed, broken down and cleaned block by block afterwards, and stored flat until the next time, rather than standing unused and deteriorating.

Biosecurity is a whole protocol rather than a building material, so follow the guidance that applies to your species and situation on separation distances, movement, equipment and clean-down. The structure is one part of it.

Get it right first time

The one thing worth knowing: sort the drainage before you build anything.

Almost every unpleasant animal compound is unpleasant for the same reason: water has nowhere to go. Rain, washing down and soiling all end up in the same low corner, and once that corner is permanently wet it stays that way, whatever the walls are made of.

Set the falls, decide where the water leaves, and make sure the floor works before the first course goes down. It is a morning's thought and it determines whether cleaning the compound takes ten minutes or an hour, every single week, for the next twenty years.

Ask our engineer

Questions about compound layouts, floors, drainage or reconfigurable pens? Ask below, or get in touch directly.

Common Questions

Things that frequently come up when carrying out this project.
Why use plastic blocks rather than timber for animal pens?

Timber absorbs urine and washing water, stays damp in the low courses where it matters most, and once it softens it becomes both a structural problem and a place organisms live. Treated timber also puts preservative in reach of animals that chew.

PolyBrick is non-absorbent, so it does not soften, rot or harbour damp, and it hoses down to a clean surface. The material is inert, with nothing applied to the surface to be chewed off.

Will PolyBrick walls contain animals on their own?

No, and it is important to be clear about that. The blockwork forms the solid part of a compound: base courses, low walls, dividers and surrounds.

Anything that climbs, jumps, flies or digs needs the rest of the specification, meaning mesh above the wall, a roof or netting over the top, and a dig-proof perimeter below ground. Follow the guidance for your species on height, mesh gauge, dig depth and space per animal.

Can the walls be disinfected?

The surface is non-absorbent, so it washes to a clean surface rather than soaking up soiling, which is what a porous or splintered material does. That makes it a considerably better starting point for a clean-down than timber.

Biosecurity is a whole protocol rather than a material, so follow the guidance that applies to your species and situation.

What floor should an animal compound have?

Bare earth suits poultry and pigs meant to root and dust bathe, but it poaches in winter and cannot be disinfected. Hard standing cleans thoroughly, which suits quarantine pens and kennels, but needs a fall and a drain.

A stabilised gravel base sits between the two: firm and free-draining, no standing mud, and it copes with hosing without turning to slurry.

Can a pen be taken apart and moved?

Yes. There are no fixings or mortar, so compounds can be extended, subdivided, dismantled and rebuilt elsewhere. That suits rotation, temporary quarantine areas, and any setup that changes as stock numbers do.

Blocks from a pen you no longer need go into the next project rather than being cut up.

How do you stop predators or animals digging under?

With a dig-proof perimeter below ground, installed before the walls go up. Retrofitting it later means taking the walls apart, so decide at the setting-out stage whether you need it.

Follow the guidance for the species you are containing or excluding on how deep and how far out that perimeter needs to run.

How do I make the compound easy to clean?

Build with a fall so water runs to one place and out rather than pooling in a corner, keep internal corners as open as you can, and make the junction between wall and floor something a brush can get into.

Build sections that lift out where you need access, since opening a wall is considerably more thorough than working through a small gate.

Is it suitable for a quarantine or isolation pen?

It suits the application well. Non-absorbent walls wash to a clean surface, where porous, cracked or splintered materials give organisms somewhere to sit through a clean-down.

The pen can also be built when needed, broken down and cleaned block by block afterwards, and stored flat until next time rather than standing unused and deteriorating.

Will animals chew or damage the blocks?

The material is a solid, UV stabilised recycled polypropylene with nothing applied to the surface, so there is no coating or preservative to come off.

It does not soften with moisture the way timber does, which is what usually makes chewing and rubbing damage progressive rather than superficial.